Bobrick B-5837 Grab Bar For Toilet Compartment in Stainless Steel
Grab bar and concealed mounting plates shall be constructed of type-304 stainless steel with satin finish. Grab bar shall have wall thickness of 18-gauge and outside diameter of 1-¼". Distance from inside of grab bar to finished wall shall be 1-½". Flanges shall be 1/8" thick stainless steel plate, 2" x 3-1/8" in diameter, and each shall have two screws holes. Flange covers shall be 22-gauge and shall snap over mounting flanges to conceal mounting screws. Grab bar shall have 90 degree return to flange. Ends of grab bar shall pass through flanges and be heliarc welded to form one structural unit.
,br>
Satin-finish 18-gauge type 304 stainless steel tubing 1-¼" D
Concealed mounting flange 1/8" thick stainless steel plate, 2" W x 3-1/8" H
Cover is 22-gauge stainless steel with satin-finish, 3-¼" D
Grab bars that provide 1-½ clearance from the wall can support loads in excess of 900 pounds
Meets ADA Accessibility Guidelines in U.S.A
